|
|
| Miscellaneous Parts |
| Datsun Z V-8 Mounting Kit, #DAT-200 |
28 |
315.00
(UPS Ground) |
|
| Set Back Plate, Passenger Side, #DAT-101 |
3 |
25.00
(Priority Mail) |
|
| Set Back Plate, Driver Side, #DAT-102 |
4 |
30.00
(Priority Mail) |
|
| Spacer, Aluminum (1.25 Inches Thick),
#DAT-103 |
1 |
20.00
(Priority Mail) |
|
| Spacer, Aluminum (2.25 Inches Thick),
#DAT-104 |
2 |
25.00
(Priority Mail) |
|
| Spacers (between body and front crossmember),
one pair, #DAT-105 |
3 |
25.00/pair
(Priority Mail) |
|
| Transmission Crossmember, #DAT-106 |
10 |
65.00
(Priority Mail) |
|
| Hood Latch Firewall Bracket, #DAT-107 |
2 |
25.00
(Priority Mail) |
|
| Hood Latch Bracket, Removable, #DAT-108 |
2 |
20.00
(Priority Mail) |
|
| Speedometer Cable (70 Inch), #DAT-111 |
2 |
70.00
(Priority Mail) |
|
| 90° Angle Drive with .66:1 Reduction Ratio, #DAT-130 |
1 |
70.00
(Priority Mail) |
|
| Cooling Parts |
• Now! Download
entire Cooling System chapter (Chapter 12 of Datsun-Z manual)
(Adobe
Acrobat .pdf — if you need the free Acrobat Reader, go
here) |
Datsun Z Aluminum Radiator, #DAT-121
PLEASE NOTE: the actual weight of this item is less than ten lbs., but it has an
oversize dimensional shipping weight, calculated as 30 lbs.
|
30 |
185.00
(UPS Ground) |
|
Radiator Mounting Kit,
#DAT-125
The mounting kit is now made from aluminum to save weight and includes aluminum flat bar for mounting electric fans. Page 12-5 |
10 |
85.00
(UPS Ground) |
|
| V8 Z Car Water Temperature
Bushings, 1/2 NPT, #DAT-126 |
1 |
21.00
(First Class Mail) |
|
| V8 Z Car Water Temperature
Bushings, 3/8 NPT, #DAT-127 |
1 |
21.00
(First Class Mail) |
|
Hose Splicer Kit, #DAT-128 , includes one 1-1/4", two 1-1/2" brass hose splicers and one 1-1/2"
to 1-1/4" hose reducer bushing. Page 12-8
|
1 |
20.00
(First Class Mail) |
|
Air-Bleed Valve, #DAT-129,
Specify size: 1-1/4", 1-5/16". 1-3/8", or 1-1/2"
|
1 |
27.00
(First Class Mail) |
|
Tee for Radiator Hose,
You must specify a size —
Use photo on the TPI tee page to check sizes for all models |
1 |
24.00
(First Class Mail) |
|
Headers: (d-port usually found on LT1, ZZ3, ZZ4…)
Our headers will work with stock heads, but may not fit all aftermarket heads (e.g., Dart).
|
Headers. 1-1/2" primary tubes, (price is per pair). #DAT-401 - mild steel
#DAT-401C - ceramic coated
Will work with stock heads, but may not fit all aftermarket heads (e.g., Dart). |
18 |
steel: 190.00/pair
(UPS Ground) |
|
ceramic: 290.00/pair
(UPS Ground) |
|
Headers. 1-5/8" primary tubes, Page 14-12.
#DAT-402 - mild steel
#DAT-402C - ceramic coated
Will work with stock heads, but may not fit all aftermarket heads (e.g., Dart).
Please also indicate if heads have a D-Port,
when adding this item to cart
(d-port usually found on LT1, ZZ3, ZZ4…) |
20 |
steel: 220.00
(UPS Ground) |
|
ceramic: 320.00
(UPS Ground) |
|
| Driveshaft Flanges |
Drive Shaft Adapter Flange (2.25 Inch
Pilot), for 1970–1978 Z Cars, #DAT-110
|
3 |
60.00
(Priority Mail) |
|
Drive Shaft Adapter Flange (2 Inch
Pilot), for 1975 Z Cars, #DAT-110-2.0
|
3 |
70.00
(Priority Mail) |
|
Drive Shaft Adapter Flange (2 Inch
Pilot), for 300ZX Cars, #DAT-110-300ZX
|
3 |
65.00
(Priority Mail) |
|
Quick Scroll: